MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 26
The current percentage of dropped packets between the encoder
and decoder (the packet loss is introduced by the network link).
Zixi™ allows to recover up to 30% packet loss.
Total number of packets dropped between the encoder and the
decoder due to the network link. The dropped packets are
recovered by Zixi™ technology (see below parameters).
The total number of dropped packets that have been recovered on
the decoder side since the beginning of the streaming.
Total number of non-recovered packets since the beginning of the
streaming. If the packet loss is lower than 30%, this number
should remain to zero, meaning no interruption or decoding
artifacts were experienced by the viewer.
Table 4-1: The Zixi™ Channel Statistics
NOTE:
For getting sufficient error-recovery, it is recommended to set the Zixi™ Latency (in Channel / Error Correction) at least 3
times larger than the RTT (i.e Latency >= 3* RTT).
To Next Page
Loading...
