MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 62
• If the login window does not appear, open a new browser tab. Insert (in the URL field)
the IP address that was set to the MGW Diamond Encoder prior to the upgrade. If the
login window appears close the previous browser tab and proceed to step 7.
Figure 6-4: MGW Diamond Login window
9. Log on (refer to the Logging on section for details).
10. In the General screen, verify that the upgrade was successful by inspecting the
Software Version in the System Information section.
To Next Page
Loading...
