EasyManua.ls Logo

Vitus Audio RD-101 - Safety Notice; Mains Supply Voltage; Maintenance; Mains Fuses

Default Icon
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
RD-101 | Version 1
Safety notice
The Vitus Audio RD-101
contains no user serviceable
parts except from the mains
fuse. Do not attempt to open
the case. There are potentially
dangerous voltages present
inside. Should your RD-101
show signs of malfunction,
then please contact your
dealer or Vitus Audio.
Mains supply voltage
Any unit may be set for
operation in 100V, 115V or
230V A.C. Units are shipped
set for the mains supply
voltage according to the
destination. The voltage
setting can be updated later
by your dealer, if necessary.
Maintenance
Vitus Audio products are
designed to run for many years
without the need for regular
maintenance. Our products
contain no user serviceable
parts except from the mains
fuse. Should your RD-101 show
signs of malfunction, please
contact your dealer or Vitus
Audio.
Mains fuses
The mains fuses are accessible
from the outside of the DAC.
You will find the mains fuses
just below the power inlet. If
the fuses blow, then you can
easily replace them. The fuses
only blow on the occurrence
of power surges or if there is
a fault in the unit. Normally
power surges cause no other
damage other than blowing
the fuses. When the fuses blow
repeatedly on replacement,
then the unit most likely has
a malfunction. In case of
malfunction the unit must be
returned to Vitus Audio for
repair.
4. operation & service

Related product manuals