39
RD-101 | Version 1
7. examples operating
7. examples
Example 5
Setting the RD-101
to remember the
current volume step.
Press the“MENU”button to
enter Menu Mode.
Navigate to the V.INIT
submenu, using the function
buttons on the left front
1. Scroll forward in the
menu.
2. MENU/ Enter & Exit
SELECT submenus and
selectsettings.
3. Scroll backward in
the menu.
In the V.INIT submenu you can
set the RD-101 to remember
the current volume step. The
RD-101 will start up in this
volume step when it leaves
standby. This volume step is
not remembered when the
power cord is removed. Then
the RD-101 will initiate in the
volume step as it is defined in
the V.INIT sub-menu.
Go to REMEMBER press
SELECT. The display now
shows V.INIT. The RD-101 will
now start up in the current volume
step when it leaves standby.
RD-101 Left front panel
MENU
EXIT
SETUP
BACK
INPUTS
BRIGHT
V.INIT
REMEMBER
V.INIT
SELECT
SELECT
SELECT
To Next Page
Loading...