• Room:
The device’s room name is shown. Tap to open the screen displaying the room options.
The currently selected room appears with a check mark. To change the room, tap on the
desired room or enter a custom room name (New Room) to automatically save the
change (Android), or tap the < Back button (iOS) to save and return to the previous screen.
• Owner:
The account name (email) appears along with the device’s QR Code.
The QR Code contains your account name information so that another user can scan
this code from their mobile device in order to share devices via the Vivitar Smart Home
Security app.
To sign out of your account, tap Sign Out.
NOTE: This setting cannot be changed for shared devices.
• Model:
The device model name appears.
• Advanced settings:
Tap Advanced settings to open the following device settings option:
- Alerts: On / Off
The Alerts option allows you to turn push notifications on of off.
ON: If the Alert is set to On, you will receive a push notification alert message on your
mobile device when there is a change to the Door Status – Opened or Closed.
OFF: If the Alert is set to Off, there is no notification alert message on your mobile
device when there is a change to the Door Status – Opened or Closed.
• Firmware:
The device’s firmware version number is displayed.
• Remove device:
Tap Remove device to remove the device from your account.
A message appears to reconfirm. Tap Cancel to return to the settings without removing
the device or tap Remove to remove the Smart Home device from your account. If you
have selected to remove the device, a message appears once the device is successfully
removed.
To Next Page
Loading...