INITIAL SETUP
NOTE:
• Your Smart device is supported only on a 2.4GHz Wi-Fi Network. Before setup, please make
sure your mobile device is connected to a 2.4GHz Wi-Fi Network.
• Please follow the steps below to create your User Account. You must be logged into your
User Account to register and use your Vivitar Smart device.
INITIAL DEVICE AND APP SETUP:
1. ENABLE MOBILE DEVICE WI-FI
Make sure to enable Wi-Fi on your smartphone or tablet via the settings of your mobile
device.
2. BATTERIES:
Make sure to have 2 new AAA batteries ready to be installed in the device during the app
setup.
3. LAUNCH MOBILE APP
Before installing the batteries, if you have not already launched the app, tap the
Vivitar Smart Home Security application icon on your smartphone or tablet to launch the
installed app.
NOTE: Please check that your Vivitar Smart Home Security app is up to date with the latest
version.
4. TUTORIAL
A quick overview through the app appears.
Scroll through the pages to view the tutorial then tap Start or tap Skip to continue the initial
setup without viewing the tutorial.
NOTE: Some notification windows appear during the initial setup’s quick overview
regarding the permission of receiving Notifications such as sounds, icon badges, alerts as
well as allowing the app to access your location to adjust sunrise & sunset time. Tap Allow
To Next Page
Loading...