VMI CUBE - Page 66

To Next Page

To Previous Page

Step 1

• Open the VMI+ application.

• Select the VMI

CUBE button.

Step 2

• A VMI

CUBE pairing page will open.

• Select the VMI

CUBE to be configured. Two identification

methods are available:

o Press the icon. The VMI light halo will flash in green

for a few seconds visually indicating which VMI CUBE is

ready for configuration.

o If you cannot see the halo, place the smartphone as near

to the VMI unit as possible. Press the SCAN button on the

VMI+ application and the VMI to be configured

corresponds to the unit with the number closest to 100.

• Click on the PAIR button for the VMI identified.

PAIR