78
2. Changing the ventilation mode using the control unit
• Simply open the control unit menu and access the INFORMATION menu. Press the
button twice (press and release twice).
• Choose the desired mode using the selector.
o LOW SPEED = the air is renewed at a rate of 0.36 volume/h.=
o MEDIUM SPEED = the air is renewed at a rate of 0.45 volume/h. =
o HIGH SPEED = the air is renewed at a rate of 0.55 volume/h.=
• And press the button to confirm.
F. Activating/deactivating special modes: holiday mode, 30-min. boost
mode, ventilation boost mode and fixed air flow mode
This operation can be carried out using the VMI+ application and on the control unit.
1. Activating/deactivating the special modes using VMI+
Open the VMI+ application and pair your VMI
®
CUBE unit with the application. Refer to the
previous paragraph Modify preheating settings with VMI+ and repeat step 1 Log in to the
application, step 2 Pairing and step 3 Machine identifier when logging in for the first time.
Step 4: Access the special modes
• Select the CONFIGURATION button.
• Select the SPECIAL MODES button.
• And then activate/deactivate your required special mode:
To Next Page
Loading...