82 Macro Buttons
XTS-IP / XTSc-IP Station User Guide March 2007
For example, Press [SPEED] + [SPEED]. Dial 9010. Press the [MSG]
button. Press [FWD]. Dial 6 (for all calls forwarding. Dial the voice
mailbox group number 1440. Press [SPEED].
The upper left of the LCD will display the macro string of dialed digits
and letters that represent fixed feature buttons. In the example above,
the letter “j” represents the “FWD” button. Buttons on the keyset are
identified as capitol letters A-Z from button 1-26 and lower case letters
from a, b, c, etc for buttons above 26. Use the following procedure to
see what the numbering is for the fixed buttons on your particular
phone model:
To check flexible button programming at the keyset:
1. Lift handset.
2. Press SPEED, then dial [7] + [#].
3. Dial [2] to select the KEYBTN option.
4. Press the desired flexible button(s) to display programming for the
button(s) on the LCD.
5. When finished, replace the handset.
To assign the Macro to a flexible button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Press [SPEED].
4. Dial the speed bin number that holds the macro. A confirmation
tone sounds.
j61440
MAC 9010 HH:MM pm
To Next Page
Loading...
