Answering Machine Emulation 19
XTS-IP / XTSc-IP Station User Guide March 2007
Speaker Mode
The VM message is broadcast over the speaker. The MUTE key is
enabled and the LED lights solid red. When the station is monitoring the
caller in VM, the display shows.
MAILBOX OPTIONS
The Mailbox Owner can select from the following options when a call is
sent to their voice mailbox.
To leave caller in VM and turn off speaker:
Press the ON/OFF button (SPEAKER button on IP Phone) and
continue to listen to message being left without taking action at
the keyset. After the VM message is left, the preprogrammed button
will be solid red and the keyset will return to idle.
To talk to party leaving the message:
Press the MUTE key. Station is still in CONF and caller can hear both
VM and you.
To pick up call:
Press the flexible button. When the call is picked up, the voice mail
system will disconnect from the call.
VM SCREENING
MMM DD YY HH:MM am
To Next Page
Loading...
