22 Attendant Features
XTS-IP / XTSc-IP Station User Guide March 2007
Attendant Day/Night/Special
The system’s Automatic Night Mode Feature can be overridden by the
Attendant station. Any Attendant station user can press their DND
button or a Soft Key to place the system into Night Mode.
To use this feature:
1. Press the preprogrammed NIGHT SERVICE button once
(631, DND by default),
-or-
Use the Soft Key’s DND option when in an idle condition (LED is lit
solid).
2. Press the DND button or Soft Key again to activate the Special
mode (LED flashes).
The DND button (by default) or Soft Key acts as a rotary in this
manner, starting in Day mode, Night mode, then Special mode.
When one Attendant activates this mode, other Attendant
stations’ DND buttons are lit accordingly.
Attendant Directory List Programming
The Attendant can program up to 200 names in the directory list. When
the directory list is accessed by any display telephone user, the system
displays the name associated with a speed dial number so when the
desired name is shown, the user may have the system dial the number.
The Night Service feature provides a means to place the
system in night mode or remove the system from night mode
from any keyset, providing the system was put in night
mode by the night service feature flexible button [604].
If the system was placed in night mode by the Attendant
using the DND button, or if the system was placed in night
mode by the automatic schedule, the night service flexible
button cannot remove the system from night mode.
OR
To Next Page
Loading...
Need help?
General
