114 Voice Mail
XTS-IP / XTSc-IP Station User Guide March 2007
Voice Mail Group Access
To access a VM Group:
Dial VM Group number (440-447),
-or-
Press preprogrammed VM Group flexible button,
-or-
Use the Soft Key’s VM1 option when in an idle condition (to access
group 440 only).
Voice Mail One-Touch Recording
The Voice Mail One-Touch Recording feature allows the station user,
while on an external call, to press a preprogrammed flexible button or
Soft Key and have the system record the conversation in the station
user’s mailbox.
To make a VM RECORD flexible button:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial feature code [649] + [VVV] (where VVV = 440-447 for desired
VM group.
Use of this feature when the One-Touch Recording
Warning Tone is disabled may be interpreted as a
violation of federal, state or local laws, and an invasion
of privacy. Check applicable laws in your area before
recording calls using this feature.
The “MiniVoice” system does not support Voice Mail One-
Touch Recording.
OR
To Next Page
Loading...
