Personalized Messages 93
XTS-IP / XTSc-IP Station User Guide March 2007
2. Dial the 2-digit code for the message that displays. A confirmation
tone will sound; DND button LED will flash.
To cancel a pre-assigned message:
1. Either dial the Personal Messages code [633] + [00], dial [662], or
press the DND button.
2. Replace the handset. The DND button LED will extinguish.
Custom Messages
Each station can select from ten possible custom messages to display
on the LCD of a key telephone calling that station. These messages are
programmed from the first Attendant station for system-wide use.
Each station can also program
three unique custom messages.
To select a custom message:
1. Dial [633] on the dial pad,
-or-
Press a preprogrammed PERSONAL MESSAGES button.
2. Dial a valid message number (21-30) for the desired custom
message.
The first Attendant should provide a list of messages to each station
user.
To program a unique custom message:
1. Dial [633] on the dial pad.
2. Dial a valid message number (18-20) for your custom message.
3. Enter a custom message, up to eight characters.
00 = (clears msgs) 04 =Return Tomorrow 08 =At Home
01 = On Vacation 05 =Return Next Week 09 =On Break
02 = Return AM 06 = On Trip 10 =At Lunch
03 = Return PM 07 =In Meeting
The Custom Messages feature is not available for use by
Attendant stations.
To Next Page
Loading...
Need help?
General
