Universal Day/Night Answer 111
XTS-IP / XTSc-IP Station User Guide March 2007
CONDITIONS
» Trouble Notification does not trigger a call to 911.
» Trouble notification will not occur until the expiration of the Dial
Tone Timer value and the Off-Hook Timer value.
» The name or number display option applies only to telephones
with the 24-character display. Telephones with a 16-character
display will only display a station number.
» The Trouble Notification feature applies to digital and SLT phones
that are off-hook. IP Phones that are off-hook are currently not
supported by this feature.
Universal Day/Night Answer
Incoming CO lines can be programmed for Universal Day Answer (UDA)
or Universal Night Answer (UNA). UDA/UNA assigned CO lines can also
signal over the external page port(s). If External Day programming is
enabled and the system is in the day mode, the assigned external page
port(s) present a ringing signal. UDA/UNA is established on a per CO
line basis in admin programming.
When the system is in Day or Night mode and an outside line
rings at another station, and you wish to answer it:
Dial [#5] or use the Soft Key’s UDA/UNA option. The connected
outside line can be transferred or disconnected.
A preprogrammed 608 button is a dual function button.
It provides call information for either E911 calls or for
Trouble Notification. The LCD displays which condition is
the trigger.
Each telephone utilizing Universal Day/Night Answer
must have a loop button appearance if the ringing
outside line does not display at their phone.
To Next Page
Loading...
