48 Caller ID Name/Number
XTS-IP / XTSc-IP Station User Guide March 2007
Caller ID Name/Number
This feature allows you to program a flexible button [653] to view both
the number and name on the LCD when receiving a Caller ID CO call.
When the feature is enabled, the flexible button LED is lit solid and the
name and number is displayed.
During the call:
Press the flexible button to toggle between the normal call
information display, and the name/number display.
The top line of the LCD displays the number of the caller and the
bottom line of the LCD displays the name.
Calling Forward Override
The Call Forward Override feature allows a user to reach a busy station
that is call forwarded. This allows the calling station to override the
forwarding which then allows the user to utilize Off Hook Voice Over
(OHVO), Executive Override, Monitor, Message Wait Indication, Camp
On, or Call Back Request at that station rather than forwarding to
another destination.
To override another station’s Call Forward setting:
1. Dial [5#] followed by the desired station extension.
2. Press the appropriate preprogrammed button.
Call Back = [622]
Camp On = [620]
Executive Override = [625]
Message Wait = [623]
OHVO = [628]
To Next Page
Loading...
