4Account Codes
XTS-IP / XTSc-IP Station User Guide March 2007
SINGLE LINE TELEPHONE
To enter an Account Code before a call:
1. Lift the handset.
2. Dial [627].
3. Dial the account code.
4. Dial [9] or CO Access code. A dial tone will sound.
5. Dial the desired number.
To enter an Account Code during a call:
1. Press the FLASH button. Call is placed on executive hold while
you enter your account code.
2. Dial [627].
3. Dial the account code.
Account Codes - Traveling COS (Verified)
To use Verified Account Codes:
1. Press the preprogrammed ACCOUNT CODE button (627) before
accessing a CO line.
2. Dial account code up to 12-digits. If account code matches a
verified account code, intercom dial tone is returned. Otherwise an
error tone is presented.
3. Access an outside CO line, or dial the LCR code, and then dial the
desired number.
If the account code contains fewer than 12 digits, dial [] to
automatically return to the call.
If the account code contains fewer than 12 digits, dial [] to
automatically return to the call.
SMDR must be enabled for the Account Code feature
to operate, and become part of the SMDR record.
To Next Page
Loading...
Need help?
General
