Vodavi XTS-IP - Intercom Transfer; Intercom Calls

Intercom 69
XTS-IP / XTSc-IP Station User Guide March 2007
Intercom Transfer
To use Intercom Transfer without DSS Buttons:
1. Receive or make an intercom call.
2. Press the TRANS button. An intercom dial tone will sound.
3. Dial the desired station number.
4. When the second station answers, you are in a supervised transfer
mode (first station is staged for transfer).
5. Hang up (stations 1 and 2 will be connected).
To use Intercom Transfer with DSS Buttons:
1. Receive or make an intercom call using a DSS button.
2. Press the TRANS button. An intercom dial tone will sound.
3. Press the DSS button where to transfer the call.
4. Hang up (stations 1 and 2 will be connected).
Intercom Calls
To place an Intercom Call:
1. Press the DSS button of the party to be called (if programmed at
your phone),
-or-
Dial the extension number.
(You will hear ringing if the called station is in the T mode; or three
bursts of tone if called station is in H or P modes.)
2. Lift the handset or use the speakerphone after the tone bursts stop.
3. Hang up to end the call.
Dialing a number in the numbering plan activates the
telephone automatically.