Attendant Features 23
XTS-IP / XTSc-IP Station User Guide March 2007
To access Directory List Programming:
Dial the Directory List program code [693]. The HOLD button will
illuminate and the first entry (000) in the Directory List will display:
Directory List
The following procedure is used to enter, edit, and erase names in the
Directory List for stations or speed dial numbers.
To modify the Directory List:
1. Enter the desired 3-digit Directory List number (000-199), or dial
[] to scroll up (next entry) or [#] to scroll down (previous entry)
through the list.
If changing a name already associated with an existing station, skip
to Step 4.
2. Press TRANS.
3. Enter the 3- or 4-digit station intercom number.
4. Press the MUTE button.
DIR LST AAA BIN/ICM: XXXX
nnnnnnnnnnnnnnnnnnnnnnn
AAA = Directory List entry number (000-199)
XXXX = One of the following:
» 3- or 4-digit station number (100-8999)
» 3-digit local number/name translation table number
(600-799 minus station numbers that would overlap)
» 4-digit remote device number (1000-8999 minus
(1000-8999 minus station numbers that would overlap)
» 4-digit system speed bin number (9020-9999 for XTS-IP,
9020-9099 for XTSc-IP)
nnn = Programmed Name (blank, if none)
To Next Page
Loading...
