Voice Mail 115
XTS-IP / XTSc-IP Station User Guide March 2007
While on an internal or external call:
1. Press the preprogrammed VM RECORD button, or use the Soft Key’s
REC option (for VM Group 440 only). The LED will flutter red during
setup and the following message display:
2. Once the system makes the connection, your mailbox and the
flexible button LED will light solid green. The LCD will display the
following message:
To pause or resume recording after a pause, press the
preprogrammed [655] key.
3. When you finish recording, press the preprogrammed VM RECORD
button or the Soft Key’s STOP option. The LED will extinguish and
the normal LCD call information will display.
SINGLE LINE TELEPHONE
Not applicable
CONDITIONS
» This feature only applies to digital voice mail.
RECORDING SETUP
MMM DD YY 00:00 am
RECORDING
MMM DD YY 00:00 am
To Next Page
Loading...
