Page 88
Pressure SensorVoith Turbo I Aftersales Service Manual Voith Retarder VR 115 E I Repair
Voith Turbo I 153.00009710 I arrtd I 2005-11
© 2005
7.13 Pressure Sensor
Requirements
• Retarder switched off
• Ignition switched off
Item No. Designation
9000 Pressure sensor M16x1.5,
hexagon insert bit, w.a.f. 27,
with integrated sealing ring: 32 Nm
Ö Lubricate sealing rings, O-rings and shaft
sealing rings with silicone-free, non-corrosive
grease before installation.
Hot parts!
Hands could be burned.
Ö Work carefully.
Ö Wear protective gloves or use cloths if necessary.
9000
28116
NOTE
CAUTION
To Next Page
Loading...
