Voith VR 115 E - Coolant Temperature Sensor

Page 86
Coolant Temperature SensorVoith Turbo I Aftersales Service Manual Voith Retarder VR 115 E I Repair
Voith Turbo I 153.00009710 I arrtd I 2005-11 © 2005
7.12 Coolant Temperature Sensor
Requirements
• Retarder switched off
• Ignition switched off
• Coolant drained (see page 28)
Item No. Designation
5200/2 Coolant temperature sensor M14x1.5,
hexagon insert bit, w.a.f. 21,
with copper sealing ring: 32 Nm
5300 Sealing ring A14x20, replace
Ö Lubricate sealing rings, O-rings and shaft
sealing rings with silicone-free, non-corrosive
grease before installation.
Hot parts!
Hands could be burned.
Ö Work carefully.
Ö Wear protective gloves or use cloths if necessary.
5300
5200/2
28114
NOTE
CAUTION