Vollmer MAP 200 - TECHNICAL CHARACTERISTICS

VOLLMER WERKE
Operating instructions
Issue: 01
MAP 200 / 400
Page: 4-1
4 TECHNICAL CHARACTERISTICS
Band saw MAP 200 MAP 400
Blade Width < 206 mm < 400 mm
Blade Length 5 - 10,5 mm 5 – 19 mm
Blade Thickness 0,8 - 1,47 mm 0,8 – 1,85 mm
Speed MAP 200 MAP 400
Continuous work speed < 15 m/mn < 15 m/mn
Pneumatic supply MAP 200 MAP 400
External supply air pressure > 6 bar > 6 bar
Machine supply pressure 6 bar 6 bar
Air consummation
~ 22,5 Nm³/h ~ 22,5 Nm³/h
Electrical supply MAP 200 MAP 400
Connected power (kW) 0,75 kW 1,2 kW
Conductor section 2,5 mm² 2,5 mm²
Fuse of protection for operating voltage 400V 6A 10A
Weight of machine / Measurements MAP 200 MAP 400
Weight of machine (without complementary system) 650 kg 800 kg
Shipment measurements by pallet
by case
1500x1500x1900 mm
1580x1580x1900 mm
1500x1500x1900 mm
1580x1580x1900 mm
Case for rails (only for MAP400)
3000x200x300 mm