VOLTCRAFT DL-240K - Website Configuration File Management; Review Configuration Settings

45
e) Create conguration le by website
• Afterperformingcongurationsettings,select“CREATECONFIGURATION”todownloadthecongurationleto
your computer.
• Anewwindowappearstochangethecongurationlename.Defaultnameis“Setlog”.Ifneeded,changethe
nameofthele.
• Conrmthelenamebyclicking“CREATECONFIGURATION”.Your conguration le has been downloaded/
imported to your computer.
f) Load conguration le created on the website onto the data logger
• Removeprotectivecapfromthedatalogger.
• Connect the data logger to your computer.
• Draganddropthecongurationlefromthedownloadfolderofyourcomputertothedataloggerfoldertoexecute
theconguration.
• The green LED control light (3)ashestwice,whenthecongurationleissuccessfullyinstalledonthedatalogger.
• Whenthedataloggeriscongured,disconnectthedataloggerfromyourcomputer.
g) Review conguration settings
• Startmodeisbasedonthecongurationsetting“RECORDSTARTCONDITION”.
• Stopmodeisbasedontheconguration“STOPSTYLE”.
• Youcancheckwhichstartmodeisactive,byloadingtheexistingcongurationleintothewebinterface,inthePDF
report or by entering the function menu of the data logger.
• Youcancheckwhichstopmodeisactive,byloadingtheexistingcongurationleintothewebinterfaceorby
entering the function menu of the data logger.
• Forfurtherinstructionsregardingloadingtheexistingcongurationsettings,pleasereferto“Othersettings”on
page 44.
• Forfurtherinstructionsregardingenteringthefunctionmenu,pleasereferto“a)Enterfunctionmenu”onpage50.