VOLTCRAFT DL-240K - Time-Based and Circular Logging; Logging Scenarios (Mode 7-13)

47
Mode 7
Function Loggingstartsatdenedtime.
Logging stops when memory is full.
Setting Select“STARTUPONSTARTTIME”as“RECORDSTARTCONDITION”.
Denestartrecordingdateandtimeineld“STARTTIME”.
Mode 8
Function Loggingstartsatdenedtime.
Logging stops when button ENTER (7) is pressed for few seconds.
Setting Select“STARTUPONSTARTTIME”as“RECORDSTARTCONDITION”.
Denestartrecordingdateandtimeineld“STARTTIME”.
Select“STOPBUTTON”as“STOPSTYLE”.
Mode 9
Function Loggingstartsatdenedtime.
Logging stops after PDF report generation.
Setting Select“STARTUPONSTARTTIME”as“RECORDSTARTCONDITION”.
Denestartrecordingdateandtimeineld“STARTTIME”.
Select“AFTERPDFCREATED”as“STOPSTYLE”.
Mode 10
Function Loggingstartsandstopsatdenedtime.
Setting Select“START/STOPTIME”as“RECORDSTARTCONDITION”.
Denestartrecordingdateandtimeineld“STARTTIME”.
Denestoprecordingdateandtimeineld“STOPTIME”.
Mode 11
Function Logs data immediately and circularly.
Loggingstopsoncethebatteryisdepletedor“CIRCULARLOGGING”hasbeenreplacedbyanother
“RECORDSTARTCONDITION”duringconguration.
Setting Select“CIRCULARLOGGING”as“RECORDSTARTCONDITION”.
Mode 12
Function Logs data immediately and circularly.
Should you wish an additional stop mode you choose:
Logging stops when button ENTER (7) is pressed for few seconds
Setting Select“CIRCULARLOGGING”as“RECORDSTARTCONDITION”.
Select“STOPBUTTON”as“STOPSTYLE”.