VOLTCRAFT SEM5000 - Page 92

92
Pressing the R button clears the settings and returns to the
normal display.

Briey press the button to proceed with setting the
day (ashes on the display).

Use the button or to set the number of measure-
ment days from “00” to “07”.

Briey press the button to continue with the hour
setting.

Use the button or to set the number of measure-
ment hours from “00” to “23”.

Briey press the button to exit the setup menu. The
display shows no other ashing values.
2. Starting the measurement

Proceed to set the measurement period (see chapter
9.14/1.). The example shows a measurement period of
3 days.

When the display is not ashing, briey press the
button to start the measurement.

The display changes
back to the measured
values. During the auto-
matic measurement, the
display shows the ash-
ing PERIOD (see arrow
in the gure on the right).