C
Christian JohnsonAug 3, 2025
What to do if my VOLTCRAFT VC170-1 shows no measuring change?
- YysmithAug 3, 2025
Several factors might be at play if your VOLTCRAFT Multimeter isn't registering any measurement changes. First, verify that the HOLD function isn't active, indicated by an 'H' on the display; if it is, press the HOLD button again to deactivate it. Then, ensure that you've selected the correct measuring function (AC/DC) by checking the display and adjusting as necessary. Also, confirm that you're using the appropriate measuring sockets. Finally, check the fuse, and replace it according to the instructions if it's defective.