lmportant
information
CLEANLINESS
Diesel injection
systems areoxtremelysensitiveto
dirt
and foreign m6tter. A special
workplace should
therefore be used for insoection ofcomoonents.
PLUGS
Clean fuel Iine connections thoroughly
before discon-
necting
pipes.
Plug
ends
of fusl lines etc as each component is
removed. Do not remove thess
plugs
until the compo'
nent is reconnected.
Tightening torques
Two kinds of tighlening
torques will be found in this
1. Tighten to 40 Nm
{30ft
lbs) indicates th6t a torque
wrench must be used Iortightening.
2. Tightening torque 40 Nm
{30
ft
lbs) indicates a
guidevalug.
Tightening need not be donewith a
Ioroue wrencn.
To Next Page
Loading...
