Volvo D24 - Remove Vibration Damper; Remove Lower Timing Gear Cover and Belt; Replace Idler Pulley; Remove Camshaft Rear Sprocket and Belt

6roup 21 Engine
Timing
gear
belts, replacement
-
,
,J
r{
s
L9
Remove vibration
damper
Bemove
four Allen screws
(6
mm).
Pull otJ vibration damper. Note!
Crankshaft
gear
may
sometimes
stick to vibration damper.
Ll0
Remove
lower timing
gear
cover and belt
Slacken coolant
pump
retaining
bolts to
release
belt
tension.
Remove belt.
)a
)r;O
Ll1
Replace
idle.
pulley
Always replace
pulley
when fitiing new belt.
Renrove
center bolt.
Wilhdraw plrlley
|]sing
5202.
Tap on new
pulley
and installcenter bolt.
Ll2
Remove camshaft rear
sprocket and belt
Hold sprocket
in
position
with 5199
and unscrew
sprocket with wrench 5201.
Take
care not to rolate camshaft.
)il4
),lt
L.
62