Change oil
Front axle wheel gears
1 Clean the connections for the drain plug (A) and
the level/filler plug (B).
2 Position the wheel so that the drain plug (B) is at
the bottom.
3 Remove the drain plug and drain the oil from the
wheel gear housing. Remove also the level/filler
plug (A) to facilitate draining.
4 Refit the drain plug (B). If the drain plug's
sealing ring is damaged, it must be replaced.
5 Position the wheel so that the level mark by the
level/filler hole (A) is horizontal.
6 Fill each wheel gear housing with new oil to the
edge of the level hole.
7 Refit the level/filler plug (A). If the level/filler
plug's sealing ring is damaged, it must be
replaced.
J1007659
The front axle must be raised
Front axle differential carrier
1 Clean around the drain plug (B) and the level/
filler plug (A).
2 Remove the drain plug (B) and drain the oil.
Remove the level/filler plug (A).
3 Refit the drain plug (B). If the plug has a sealing
washer, the sealing washer must be replaced.
4 Fill the differential carrier with new oil to the
edge of the filler hole.
5 Refit the level/filler plug (A). If the plug has a
sealing washer, the sealing washer must be
replaced.
J4017902
J1007658
Maintenance
569
To Next Page
