Fig 4-33 user management configuration Fig 4-34 add-general
① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK
button. Then this user will be added into the user list box; click Exit button to exit the current interface.
Note: when the default value of binding PC MAC address is 0, the user is not bind with the specify computer; the, the
user can log in DVR on the binding computer after set the specific binding MAC address.
② Authority:
Step 1: enter into Add userauthority; refer to Fig 4-35:
Step 2: In the authority interface, assign the definite
operation right for that user.
Step 3: in the user management interface, click Setup
button to modify user name, user type and binding PC
MAC address.
Step 4: select the user that user wants to delete in the
user list box and then click Delete button to delete this
user.
Step 5: click Change password button to modify the
password; click Exit button to exit the current interface.
Fig 4-35 add user-authority
VOOK professional monitoring
To Next Page
Loading...
