Maintenance39
CHARGING THE REMOVED BATTERY PACK
You can also charge the battery pack separately.
This is recommended when using an additional bat-
tery pack, for example.
To charge your battery pack, proceed as follows:
NOTICE
Risk of damage from improper use!
• Charge and use the battery pack at tempera-
tures between 5°C and 35°C.
• Store the battery pack at temperatures between
5°C and 35°C.
• Extreme heat or cold extends the charging time
and/or can cause damage to the battery packs.
• Only charge the battery pack using the AC
charger supplied.
1. Connect the AC charger
to the power supply.
2. Note the prescribed voltage of 220-240 V.
3. Connect the AC charger to the charging point on
the battery pack
.
4. Ensure that the plug is fully inserted.
The battery pack gets slightly warm while
charging.
LED
display
Battery level
LED
flashes.
Battery pack is charging.
The charging period may take
up to three hours.
LED has
gone out.
The battery pack is fully charged
and ready for operation.
To Next Page
Loading...
Need help?
General
