6.2 Storage
Observe the storage conditions for the simulator (Â section 9 on page 66). We
recommend storing the simulator in its original shipping boxes (Â section 10 on
page67).
In addition, please note the following:
• The simulator should either be completely disassembled and stored in its ship-
ping boxes, or completely assembled. It should never be partly assembled.
• Make sure that the storage location is dust-protected and dry. If the simulator is
not in use for a longer time, we recommend covering the simulator hardware to
protect it from dust. Remember to remove the dust cover from the simulator PC
before using it to prevent overheating.
• Do not store other objects on top of the simulator and ensure that no other ob-
jects can fall onto the simulator.
• Always store the instruments in the provided storage boxes when they are not
in use.
6.3 Transport
Transport the simulator in the original shipping boxes (Âsection10 on page67).
Eyesi Surgical Simulator – Installation and Operating Guide
54
Disassembly, Storage, and Transport
To Next Page
Loading...