SET UP THE TELEPHONE
7
2.6 Installation Options
Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, follow
the steps below to connect the telephone base with a standard dual-stud telephone wall mounting
plate. You may need a professional to install the wall mounting plate.
2.6.1 Tabletop to Wall Mount Installation
If you have already installed the telephone for tabletop use, unplug the telephone line cord from
the telephone wall jack, and unplug the telephone base power adapter from the wall outlet.
Remove the telephone line cord and the power adapter cord from the grooves.
1.
2. Route the telephone line cord through the rectangular hole on the wall mount bracket. Position the
lower portion grooves on the telephone base to the lower portion tabs on the wall mount bracket.
Make sure the upper portion grooves of the telephone base are above the upper portion tabs on
the wall mount bracket. Push the telephone base down until it clicks securely in place.
To Next Page
Loading...
Need help?
General
