32
PHONE SETTINGS
4.8 Rename Devices
You can create a name for each handset and doorbell. The new name can be up to 11 characters.
Press MENU when the handset is not in use.
Press
p
q
to scroll to Settings, then press SELECT.
Press
p
q
to scroll to Rename devices, then press SELECT.
Press
p
q
to choose Local handset or Doorbell, then press SELECT.
Use the dialing keys to edit the name
Press DELETE or BACKSP to erase a character.
Press and hold DELETE to erase all characters.
Press
p
q
to move the cursor to the right or to the left.
6. Press SAVE. You hear a conrmation tone.
4.9 Voice Announce
®
Caller ID
You can set your handset and/or telephone base to announce the caller ID information for incoming
calls. The voice announce caller ID setting is independent for each handset and the telephone base.
Press MENU when the handset is not in use.
Press
p
q
to scroll to Settings, then press SELECT.
Press
p
q
to scroll to Annc Caller ID, then press SELECT.
Press
p
q
to choose Set all On/Off, Local handset or Base, then press SELECT.
Press
p
q
to choose On or Off, then press SET. You hear a conrmation tone.
When you choose Set all On/Off, the screen displays Annc CID ON on all HS & BS if you
choose On, or displays Annc CID OFF on all HS & BS if you choose Off.
noteS
To use the voice announce caller ID feature, you must subscribe to caller ID service from your
telephone service provider.
Only the first four registered handsets will be able to use this feature.
No information will be announced if both the name and number are private, unknown or not
provided.
1.
2.
3.
4.
5.
•
•
•
1.
2.
3.
4.
5.
•
•
•
•
To Next Page
Loading...
Need help?
General
