VTech IS7121A User Manual

SET UP THE TELEPHONE
19
2.11 Untach Doorbell From Wall Mount Cover
After an extended exposure to cold, heat or humidity, the doorbell gasket rubber may become sticky.
If you need to remove the doorbell from its wall mount cover in case of battery replacement or
doorbell relocation, follow the steps below.
Remove the screw at the bottom.1. Insert a at-bladed screwdriver between the
doorbell and its wall mount cover to pry open
at both sides.
2.
Pry the doorbell off.3.

VTech IS7121A Specifications

General

Brand	VTech
Model	IS7121A
Category	Cordless Telephone
Language	English