VTech IS7121A - Wall Mount to Tabletop Installation

SET UP THE TELEPHONE
9
2.6.2 Wall Mount to Tabletop Installation
To change the telephone base from the wall mount position to tabletop position, follow the steps below.
If the telephone line cord and power adapter cord are bundled, untie them rst.
Slide the wall mount bracket up and remove it from the wall plate. Unplug the telephone line cord
(or DSL lter) from the wall. Unplug the power adapter from the power outlet.
Slide the telephone base up and remove it from the wall mount bracket.
See Connect the Base Station on page 4.
1.
2.
3.
4.