44
USING THE PHONE
6.14 Transfer a call
While on an outside call, you can transfer the call from one system device to another. This feature is
only applicable to models with more than one handset.
During a call, press OPTION.
Press
p
q
to scroll to Transfer, then press SELECT.
If your system has two handsets, the outside call is put on hold and your handset shows
Transferring call to HANDSET X. The destination handset rings and displays Transfer from
other handset.
If your system has more than two handsets, the handset displays TRANSFER TO: and a list of
registered handsets.
Press
p
q
to scroll to the destination handset and then press SELECT.
-OR-
Use the dialing keys to enter the destination device number (1 to 9 for HANDSET 1 to
HANDSET 9, and 0 for HANDSET 10, or or for All handsets).
Your handset displays Transferring call to HANDSET X, or Transferring call to all... if you
choose All handsets.
The destination device rings and shows Transfer from HANDSET X. To answer the call, press
, or any dialing key (0-9, or ) on the destination handset. Your handset displays Call
transferred when the other handset picks up the call.
noteS
If the destination handset is out of range, your handset shows Unable to call. Try again. and then
automatically returns to the external call.
If the destination device does not answer the transferring call within 30 seconds, the call will be
reverted to the originating handset. The originating handset displays Ringing back. No response to
transfer. If you do not press , or any dialing key (0-9, or ) on the handset to reconnect the
outside call within 30 seconds, the call ends automatically.
1.
2.
•
•
◊
◊
3.
•
•
To Next Page
Loading...
Need help?
General
