| Installation of the device
16 | CO2 Incubator Basic VWR
Chapter 3
Stacking
Figure 3 – Stacking
Two Helix devices can be stacked on top of each other. The stacking elements [1] and [2] secure
the devices on top of each other.
If the devices are placed onto mobile racks, ensure that the rollers [3] are secured by an arresting
device during operation. For reasons of stability, the rollers should be oriented to the front.
NOTE!
Transporting stacked devices:
The stacking elements are not connecting elements. Therefore, the transport of stacked devices
on sloped surfaces is not allowed!
Modifications
NOTE!
Modifications:
Retrofits and modifications must only be performed by the Technical Service of VWR!
To Next Page
Loading...
