Wacker Neuson DT08-D

BA DT08 SL EN - Edition 1.0 * BaDT08en1_0IVZ.fm 1-1
Table of contents
Table of contents
I
Introduction
Important information on this Operator’s Manual ..................................................... 1-1
Overall view of machine ........................................................................................... 1-2
Brief description ....................................................................................................... 1-3
Definition of operator’s control stand ................................................................. 1-3
Regulations .............................................................................................................. 1-3
EC declaration of conformity model DT08-P, for machines with CE mark on type label
1-4
Declaration of conformity model DT08-P, for machines without CE mark on type label
1-5
EC declaration of conformity model DT08-D, for machines with CE mark on type label
1-6
Declaration of conformity model DT08-D, for machines without CE mark on type label
1-7
Type labels and component numbers ...................................................................... 1-8
Signs and symbols ................................................................................................... 1-9
Safety instructions
Identification of warnings and dangers .................................................................... 2-1
Warranty .................................................................................................................. 2-1
Disposal ................................................................................................................... 2-1
Designated use and exemption from liability ........................................................... 2-2
General conduct and safety instructions .................................................................. 2-2
Organisational measures ................................................................................... 2-2
Selection and qualification of staff, basic responsibilities .................................. 2-3
Safety instructions regarding operation ................................................................... 2-4
Normal operation ............................................................................................... 2-4
Applications with lifting gear .............................................................................. 2-6
Trailers ............................................................................................................... 2-6
Transport ........................................................................................................... 2-6
Temperature ranges .......................................................................................... 2-6
Safety instructions for maintenance ......................................................................... 2-7
Warning of special hazards ..................................................................................... 2-9
Electrical energy ................................................................................................ 2-9
Gas, dust, steam, smoke ................................................................................... 2-9
Hydraulics .......................................................................................................... 2-9
Noise ............................................................................................................... 2-10
Oil, grease and other chemical substances ..................................................... 2-10
Battery ............................................................................................................. 2-10
Tracks .............................................................................................................. 2-10
Operation
Control stand overview (model DT08-P skip and high-tip skip) .............................. 3-1
Control stand overview (model DT08-D skip and high-tip skip) ............................... 3-2
Putting into operation ............................................................................................... 3-4
Safety instructions ............................................................................................. 3-4
Putting the machine into operation for the first time .......................................... 3-4
Running-in period .............................................................................................. 3-4
Check lists ......................................................................................................... 3-5
Start-up checklist ............................................................................................... 3-5
Operation checklist ............................................................................................ 3-5
Parking checklist ................................................................................................ 3-5
Before starting the engine ................................................................................. 3-6
General information on starting the petrol engine ............................................. 3-6
Procedure .......................................................................................................... 3-6
Table of contents