BA DT08 SL EN – Edition 1.0 * dt08b510.fm 5-9
Maintenance
Filling up engine oil
Too much or incorrect engine oil can result in engine damage! Therefore:
☞ Do not add engine oil above the MAX mark of the oil dipstick 76/A
☞ Use only the specified engine oil
Use a suitable container to collect the engine oil as it drains and dispose of it in
an environmentally friendly manner!
Proceed as follows:
☞ Clean the area around filler cap A with a clean lint-free cloth
☞ Open filler cap A
☞ Fill in engine oil
☞ Wait a moment until all the oil has run into the oil sump
☞ Check the oil level
☞ Fill up if necessary and check the oil level again
☞ Close filler cap A
☞ Completely remove all oil spills
OIL
Fig. 76: Filling up engine oil (petrol engine)
Fig. 76: Filling up engine oil (diesel engine)
OIL
A
A
To Next Page
Loading...
