BA DT08 SL EN – Edition 1.0 * dt08b320.fm 3-5
Operation
Check lists
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring jobs listed below are described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Start-up checklist
Check the following points before putting the machine into operation or starting the engine:
Operation checklist
After starting the engine and during operation, check and observe the following points:
Parking checklist
Check and observe the following points when parking the machine:
No.
Question
✔
1
Enough fuel in the tank? (➠ 5-3)
2
Engine oil level OK? (➠ 5-8)
3
Oil level in hydraulic tank OK? (➠ 5-14)
4
Starter cable pull OK?
5
Lubrication points greased? (➠ 5-29)
6
Tracks checked for cracks, cuts etc.? (➠ 5-17)
7
Especially after cleaning, maintenance or repair work:
➥ Rags, tools and other loose objects removed?
No. Question
✔
1
Anyone dangerously close to the machine?
2
Drive levers working correctly? (➠ 3-13)
No. Question
✔
1
Loader unit (option) lowered to the ground? (➠ 3-18)
When parking on public roads:
2
Machine adequately secured?
When parking on slopes:
3
Machine also secured with chocks under the tracks to prevent it from rolling
away?
To Next Page
Loading...
