5-24 BA DT08 SL EN – Edition 1.0 * * dt08b530.fm
Maintenance
5.9 Fluids and lubricants
Component/application
Engine/machine
fluid
Specification
Season/tempera-
ture
Capacities
1
1. The capacities indicated are approximate values; the oil level check alone is relevant for the correct oil level
1. Capacities indicated are no system fills
Petrol engine
(model DT08-P) Honda petrol
engine
Engine oil AGIP MOTOROIL HD SAE 15W-40 Year-round 1.1 l
Diesel engine
(model DT08-D) Yanmar diesel
engine
Engine oil
AGIP DIESEL SIGMA S 30
SAE
2
15W-40
2. According to DIN 51511
Year-round 0.6 l
Hydraulic oil tank
(model DT08-P)
Hydraulic oil AGIP ARNICA 46
3
3. According to DIN 51524 section 3
Year-round 22.3 l
Biodegradable oil
4
4. Biodegradable hydraulic oil based on saturated synthetic esters with an iodine value of < 10, according to DIN 51524, section 3, HVLP, HEES
PANOLIN HLP Synth 46
FINA BIOHYDRAN SE 46
Hydraulic oil tank
(model DT08-D)
Hydraulic oil AGIP ARNICA 46
5
5. According to DIN 51524 section 3
Year-round 30.1 l
Biodegradable oil
6
6. Biodegradable hydraulic oil based on saturated synthetic esters with an iodine value of < 10, according to DIN 51524, section 3, HVLP, HEES
PANOLIN HLP Synth 46
FINA BIOHYDRAN SE 46
Grease
Roller and friction
bearings
7
7. KF2K-25 according to DIN 51502 multipurpose lithium grease with MoS² additive
AGIP GR SM Year-round As required
Lubrication point Multipurpose grease AGIP GR SM Year-round As required
Fuel tank (model DT08-P) Honda
petrol engine
Petrol Regular
8
91 octane, DIN 51 607
8. Unleaded regular
Year-round 6.0 l
Fuel tank
(model DT08-D) Yanmar diesel
engine
Diesel fuel
No. 2-D, DIN 51601 grade Over 4 °C
5.4 l
No. 1-D, DIN 51601 grade Below 4 °C
To Next Page
Loading...
Need help?
General
