Wacker Neuson DT08-D - Stopping the Petrol Engine

3-8 BA DT08 SL EN – Edition 1.0 * * dt08b330.fm
Operation
Stopping the petrol engine
☞ Check whether the switch for auxiliary hydraulics 7 is in the centre position
➥ The auxiliary hydraulics is switched off
☞ Push throttle 6 fully backwards
☞ Push lever 2 fully backwards
➥ The engine stops
☞ Turn the engine switch to position B
Machine equipped with electric starter
☞ Turn the engine switch to position K – See Electric starter on page 3-7.
☞ Turn fuel cock D to the right
Fig. 29: Auxiliary hydraulics (option)
7
Fig. 30: Throttle
6
2
Fig. 31: Engine switch
B
C
Fig. 32: Fuel cock
D