5-20 BA DT08 SL EN – Edition 1.0 * * dt08b530.fm
Maintenance
Instructions concerning specific components
Electric lines and fuses
Always observe the following instructions:
• Defective components of the electrical system must always be replaced by an
authorised expert. Fuses may be changed by unqualified persons
• When carrying out maintenance work on the electrical system, pay particular attention
to ensuring good contact in leads
Alternator
Always observe the following instructions:
• Only test run the engine with the battery connected
• When connecting the battery, ensure that the poles (+/–) are not inverted
• Always disconnect the battery before carrying out welding work or connecting a quick
battery charger
Operation of electric consumers (e.g. lighting equipment) is not allowed. This is
why the machine has no socket.
To Next Page
Loading...
