BA DT08 SL EN – Edition 1.0 * dt08b510.fm 5-5
Maintenance
Petrol specification
Use only high-grade fuels
For model DT08-P (petrol engine)
Diesel fuel specification
Use only high-grade fuels
For model DT08-D (diesel engine)
Cleaning the fuel filter (petrol engine)
Petrol is extremely flammable, and explosive under certain circumstances.
Danger of accidents!
☞ No smoking in the work area, no naked flames or sparks.
☞ Once the filter cup is back in position, check for leaks and ensure that all
petrol spills have been wiped away before starting the engine.
☞ Set the fuel cock to OFF
☞ Unscrew filter cup A with a suitable tool
☞ Remove filter cup A and O-ring B, and wash with a nonflammable solvent.
☞ Allow filter cup A to dry thoroughly
☞ Screw filter cup A back on again with a suitable tool
☞ Set the fuel cock to ON and check for leaks
Grade
Octane
number
Use
• Regular DIN 51607 91 −15 °C to 45 °C
Grade
Cetane
number
Use
• No. 2-D according to DIN
51 601
Min. 45
4 °C to 45 °C
• No. 1-D according to DIN
51601
For outside temperatures below 4 °C or for
operation above 1500 m altitude
Fig. 72: Filter cup DT08-P (petrol engine)
A
B
To Next Page
Loading...
