BA DT08 SL EN – Edition 1.0 * * dt08b540.fm 5-25
Maintenance
5.10 Maintenance plan DT08-P (petrol engine)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance manual
of the attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Service work
(daily)
Every 20 s/h
Every 50 s/h
Every 100 s/h
300 s/h
Every 1000 s/h
once a year
Customer
Authorised
workshop
Fluid and filter changes ( ):
Carry out the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●● ●
• Fuel filter
2
●● ●
• Hydraulic oil filter insert ●●●
• Hydraulic oil ●●
• Replace the air filter element ●●
• Hydraulic oil tank breather ●●
• Replace the spark plug ●●
Inspection work ( ):
Check the following material. Refill if necessary:
Check the fuel level, fill up fuel
●●
• Engine oil ●●
• Hydraulic oil ●●
Clean the filter cup
●●
Check hydraulic oil radiator for dirt, clean if necessary
●●
Check oil cooling systems and hoses for leaks and pressure (visual check)
●●
Air filter (damage)
●●
Check exhaust system for damage and condition
●●
Check valve clearance, adjust if necessary
●●
Check and clean the spark plug
●●
Check/set idling speed
●●
Empty the petrol tank
●●
Check battery electrolyte. Fill up with distilled water if necessary
●● ●
Check alternator, starter and electric connections, bearing play and function
●●
Pressure check of primary pressure limiting valves
●● ●
Maintenance
To Next Page
Loading...
Need help?
General
