Wacker Neuson DT08-D User Manual

5-26 BA DT08 SL EN – Edition 1.0 * * dt08b540.fm
Maintenance
Check tracks for cracks and cuts
●●
Check track tension. Retighten if necessary
●●
Bearing play of tread rollers, track carrier rollers, front idlers
●●
Check piston rods for damage
●●
Check screws for tightness
●● ●
Pin lock
●●
Line fixtures
●●
Adhesive labels and Operator’s Manual
●● ●
Lubrication service ( ): Lubricate the following assemblies/components – see Lubrication plan DT08 with skip on page 5-29:
•Skip ●● • Tilt ram ●● • Loader unit (option) ●● • Loader unit rams (option) ●● • Track tension ●● • Track roller bearings ●●
Leakage check ( ): Check for tightness, leaks and chafing: pipes, flexible lines and screw connections of the following assemblies and components. Rectify if necessary:
• Visual check
●●
☞ Engine and hydraulic system ●● ☞ Oil cooling circuit ●● ☞ Travelling drive ●●
1. Replace the engine oil the first time after 20 s/h or the first month, then every 100 s/h or after 6 months at the latest 2. Replace the fuel filter the first time after 50 s/h, then every 400 s/h
5.10 Maintenance plan DT08-P (petrol engine) Work description For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Service work
(daily)
Every 20 s/h
Every 50 s/h
Every 100 s/h
300 s/h
Every 1000 s/h
once a year
Customer
Authorised
workshop

Wacker Neuson DT08-D Specifications

General

Brand	Wacker Neuson
Model	DT08-D
Category	Construction Equipment
Language	English