BA DT08 SL EN – Edition 1.0 * * dt08b550.fm 5-27
Maintenance
5.11 Maintenance plan DT08-D (diesel engine)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the
attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Service work
(daily)
Once a month or
after 50 s/h
Every 3 months or
after 200 s/h
Every 6 months
or after 400 s/h
Every 1000 s/h
once a year
Customer
Authorised
workshop
Fluid and filter changes ( ):
Carry out the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●●
●
• Engine oil filter
2
●
●
●
• Replace the fuel filter element
3
●
●●
• Replace the air filter element ●●
• Hydraulic oil filter insert ●●●
• Hydraulic oil ●●
• Hydraulic oil tank breather ●●
Inspection work ( ):
Check the following material. Refill if necessary:
Check injection setting
●●
Check and adjust injection time
4
●
●
Clean and adjust the fuel injection pump
5
●
●
Check and adjust the injection pressure of the injection nozzles, clean the injection needles/nozzles
●
●
Clean the fuel filter ●●
Check condition and injection of fuel injection nozzle ●●
Check the fuel level, fill up fuel ●●
• Engine oil ●●
• Hydraulic oil ●●
Check hydraulic oil radiator for dirt, clean if necessary
●●
Check oil cooling systems and hoses for leaks and pressure (visual check)
●●
Air filter (damage)
●●
Check exhaust system for damage and condition
●●
Intake and exhaust valve clearance
●●
Empty diesel fuel tank
●●
Check battery electrolyte. Fill up with distilled water if necessary
●● ●
Check alternator, starter and electric connections, bearing play and function
●●
Pressure check of primary pressure limiting valves
●● ●
Check tracks for cracks and cuts
●●
Maintenance
To Next Page
Loading...
