BA EZ26 en/us* 1.0 * EZ26_01_400.fm 4-17
Putting into operation 4
Assembly
The term screw is used for fastening equipment used in the following
sequence:
1. Screw
2. Washer
Only install protective structures with the help of a crane.
Protective Front Guard structure category I (cab option)
Danger of piercing/penetration by objects from the front!
Causes serious injury or death.
► Install a protective Front Guard structure in areas with danger from the
front.
► The vehicle owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
► The vehicle owner must ensure that only work is performed that does
not require any higher protection.
The protective Front Guard structure corresponds to category I according
to ISO 10262:1998.
► Accidents cannot be fully avoided despite equipping a vehicle with
protective structures.
To Next Page
Loading...
