BA EZ26 en/us* 1.0 * EZ26_01_400.fm 4-19
Putting into operation 4
Shatter protection
Danger of piercing/penetration by objects from the front!
Work involving risk of piercing/penetrating by objects from the front can
cause accidents with serious injury or death.
► To operate the vehicle, shatter protection must be installed if an
attachment (a breaker, for example) causes fragments to fly around.
This shatter protection takes over the function of a front window. If the
machine is equipped with a cab, the front window must be closed
during hammer operation.
► The vehicle owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
► The vehicle owner must ensure that only work is performed that does
not require any higher protection.
► Observe the prescribed work area - see Job site.
Danger of accident with restricted visibility!
Restricted visibility (e.g. weather influences, dust, improper cleaning) can
cause serious injury or death.
► Stop machine operation immediately.
► Do not use brushes, steel wool or other abrasive cleaners for cleaning
the polycarbonate disk. Do not wipe dust in a dry state.
Possible damage to the vehicle structure from improper assembly.
► Only an authorized service center may install the shatter protection for
the first time.
The shatter protection protects the user against penetrating fragments
from the front.
► Accidents cannot be fully avoided despite equipping a vehicle with
protective structures.
To Next Page
Loading...
